1.Tutorial on how to make old to young, earlier we have done aging a young face. Now what we nneed to do is select a image you want to work out.

2.Open the image in photoshop and i create a duplicate layer as i dont want to mess up the original images,

3.Then i select the duplacate layer and adjust its Levels (Ctrl+l).

4.Now we are going to work on the important step of this tutorials, select the Healing Brush Tools and then holding Alt key and click on a part of image (click on the wrinkle free part)as shown in the image below

5.Set the healing brush Diameter to 10 px hardness to 100% and spacing to 25% Angle to 0 and Roundness to 100% and select the pen pressure from the drop down for the size.

6.Click on the all the wrinkle part of the image(dont try to drag the brush) untill you clear up all the wrinkle. see the example image below.

7.After removing all the wrinkle we have younger looks,to look more cools lets add some more.

8.Select the blur tool from the tool box and set the Brush size to 20 or you can adjust your own brush size as your requirement, set the mode to normal and strenght to 12% and apply on the face part.

9.Now create a new layer then select the brush tool with black foreground brush over the hair.

10.Change the layer mode to overlay.

Our final Results

[2]-Now click on the Shape > Spline > NGon use the following setting and create a Shape like this in the Top view Image as shown below.

[3]-Apply the Bevel Modifier and use the following setting Image as shown below

[4]-Now your object should be like this in the front view Image as shown below

[5]-Click on the Geometry > Standard primitives > Cylinder and use the following setting And apply the Twist Modifier use the following setting image as shown below.

[6]-Again creating cylinder and use the following setting set cylinder like this in the front view

[7]-Press (M) you will see the material window is open An import a Steel map like this image as shown below

[8]-Now add some lighting effect press (F9) you will see the final image is ready save the file in your folder.

Tutorials source from tutorialized.com

Fill ( Edit > Fill ) layer “back” with black.

Impact Using the Horizontal Type Tool, write some large text in white.

For this tutorial, I wrote “world” in 60 pt with the font Arial.

Rasterize the text ( Layer > Rasterize > Text ).

Rename the layer that has the now rasterized text “Text”.

Step 2

Duplicate layer “Text” and rename the new layer “Text 2″. Hide layer “Text 2″ by clicking on the eye to the left of it on the Layer Palette.

Activate layer “Text” on the Layer Palette and merge all visible layers ( Layer > Merge Visible ).

Transform the image 90 degrees clockwise ( Edit > Transform > 90 degrees CW )

Wind 1Apply the Wind filter ( Filter > Stylize > Wind ) with the method “Wind” and the Direction “From the Right”. Repeat ( Ctrl-f ) this filter.

Now, apply the Wind filter ( Filter > Stylize > Wind ) again except this time, use the Direction “From the Left”. Repeat ( Ctrl-f ) this filter.

Step 3

Transform the image 90 degrees counter-clockwise ( Edit > Transform > 90 degrees CCW ). We are now going to apply the Wind filter again except this time, only once in each direction.

Wind 2Apply the Wind filter ( Filter > Stylize > Wind ) with the method “Wind” and the Direction “From the Right”.

Now, apply the Wind filter ( Filter > Stylize > Wind ) again except this time, use the Direction “From the Left”.

RippleApply the Ripple Filter ( Filter > Distort > Ripple ) to make the light wavy.

Hue/SaturationOpen the Hue/Saturation window ( Image > Adjustments > Hue/Saturation ) and press Ok with the default values.

Step 4

Final Shocking TextUnhide layer “Text 2″ and activate it on the Layer Palette.

Select the text on the layer by pressing Ctrl then clicking on the thumbnail of the layer on the Layer Palette.

Contract ( Select > Contract ) the selection by 2 pixels. Now Fill ( Edit > Fill ) in the selection with black ( Hex #000000 ).

Final step

First, merge all visible layers ( Layer > Merge Visible ).

Duplicate the only existing layer twice.

Change the Blending Mode of the middle layer to “screen”.

Change the Blending Mode of the top layer to “overlay”.

Creating dew drops using Blending Modes” & “Blending Options”

Step 1 Lets create a new document of any size. Also make sure that you make the document “Transparent”. after creating the new document the first step is to change the layer’s “Blending Option” to “Screen”.

Step 2 Next you are going to click on the “Layer Style” icon to add more styles to the water drop. Here are the styles that we will used along with the settings.

In the layers palette, double click on one of the styles that you just added to the layer. Then when the dialog box pops up, you’ll see the option for “New Style”. Click it, name the style and hit ok. The “Water” style that you just created will now appear in the styles tab.

Step 3 After creating the style, it’s time to apply that style to the image. Choose an image that you want to apply the style to. select the elliptical marquee tool from the tool box option, while pressing the “SHIFT” from the keyboard draw few circle. Now select the paint bucket tool and fill the selected area “remember its you select the black color”. To Apply the dew drop looks lets add some effect.

1.Go to FILTER-DISTORT-POLAR COORDINATE.

2.SELECT THE OPTION RECTANGULAR TO POLAR. click ok

You can see the final image now. try working of different picture.

Step 1 Open a new document with a predesigned spotlight or draw one yourself like I did;

Step 2 With the pen-tool, draw a shape like the light I drew in the image below;

Step 3 Rightclick and select “Make Selection”;

Step 4 Grab the Gradient-Tool and select a gradient from white to transparent;

Step 5 Duplicate the layer and go to Filter>Blur>Gaussian Blur of 3 or 4 pixels;

Step 6 Lower the opacity of the blurred layer to 66% and the opacity of the orginal to 33%;

Step 7 And then you are done and you can use your knowledge for the benefit of creating a spotlight!

Tutorial by- MICK MOOLHUIJSEN  http://www.mickm.com

1. Create a new document select your own size for this tutorial i m using 550×600 with black background.

2. Before you start working with it, select some pictures, for this tutorial i m using hitman and a movie poster

3. After creating a new document, let open the picture we select, copy the picture and paste it on your new document.

4. Now resize the picture you just paste, to fit on your new document

5. Then using the pen tool or rubber from the tool box option remove the unwanted part of the picture

6. Select the Type tool from your tool box and type the word “encounter” select your font style. i am using Defuse font style “you can download the font here”

7. Final step, we need to add some more text line just like the movie poster. For that we need to use a different font style and add some more extra line.

Now we have a combined photo with some text.

1.Open a new Document 500×500

2.Select Gradient tool and style to Foreground to background now apply the Gradient.

3.Now go to Filter>Render>Different Clouds

4. To Create the Lightning we actually want the black portion to be white so what we need to do is Go to Image>Adjustment>Invert OR press Ctrl+i

5.After we invert the the previous layer we have the lighting in white,but its not what we want, so what we are going to do is go to Image>Adjustment>level and adjust the Inputs levels to 172-0.27-255 respectively

6. To add some more lightning effect in different direction lets create a new layer and apply the same method but this time apply the gradient from the top left corner

7.Now we have two lightning effect, but at the moment we can only view the new layer effect so what we need to do is change the layer mode to screen.

8.If you want to add some color like blue lightning or green lighting, our first step is to join the two layer into one single layer for that PRESS Ctrl+E

9.Now to give a color lightning effect, Go to Layer>New Adjustment layer>Hue/saturation and select the “use previous layer to create clipping mask” and then we make sure that we also select the colorize option

10. For this tutorial i Set the Hue setting to 236 Saturation to 25 and lightness to 0. You can use your own setting.

If you like this tutorials please leave a comment

1) Open a new Channel Mixer adjustment layer then click to check the box that says Monochrome to make the picture black and white.

2) So by now we have done with the color to black and white picture tutotial in just two step, to add more effct on this picture lets change a part of the picture to color again

3) Click the add vector mask button from the layer channel window (bottom)

4) Activate the original file picture by clicking on the eye again.

5) Click on the Brush Tool (make sure the colors you are working with are black and white).

6) Make sure that you select the duplicate layer

5) Using the color black, carefully brush over the parts of the picture that you want to be in color, (you may need to adjust brush sizes according to the picture).

This what we have done

After

Before

1# open a new document or a image file

2# Double click on the layer(layer channel) to unlock the layer.

3# Duplicate the layer0 now you have new layer “layer 0 copy” select the “layer 0 copy”

4# select the pen tool from the tool box option and select four anchor point and right click on the selected area select the “selected area” from the pop up window and click on ok let the radius properties be 0 (example fig give below)

5# press Ctrl+Alt+i and press Delete and press Ctrl+d to deselect.

6# Hide the layer 0 (to hide the layer click the eye icon on the layer) to see the layer o copy effect

7# Now unhide the layer 0 and select it, using the pen tool select a part of it(see the fig below) click on the selected area. select the “selected area” from the pop up window and click on ok let the radius properties be 0 fig3

8# press Ctrl+Alt+i and press Delete.

9# create a new layer draw a border using pen tool and fill it background with black.

10# Final step, add some effect.here is the final image of obb

hi, create your own 3d looks car model in photoshop download more tutorial

Click here to download the Reborn Brushes.

All rights of these resources belong to their respective owners.

Step 1 – Setting Up Background:

Create a document of size 750×550 pixels. Fill the Background layer with #000000.

Place the face at the center of the document and use Soft Eraser tool to remove the other unwanted background.

Step 2a – Drawing Face Grids:

Create a new document of size 20×20 pixels and create a new layer. Use Pencil tool with size 1px and color #FFFFFF, draw left and bottom border to form a “L”. Hide the Background layer and click Ctrl+A. Go to Edit > Define Pattern. Name this pattern as Grid.

Back to Jessica Alba’s document, create a new layer above the Face. Use the Paint Bucket tool and select to fill with Grid pattern

Step 2b – Drawing Face Grids:

Remove those grids that cross outside of the face area.

Go to Edit > Transform > Warp.

Distort the grids the way shown in the diagram.

Step 2c – Drawing Face Grids: Set the opacity of the grid layer to 20%. Right-click on the grid layer and choose Blending Options.

Activate Outer Glow and set its Blend Mode to Color Dodge, Opacity to 100%, Color to #FFFFFF, Spread to 0 and Size to 5px. Leave the rest of the settings as default.

Step 3a – Shattered Blocks:

Create a new layer and name it as Holes.

With Pen tool, path out several square holes according to the face grids.

Go to the Paths tab, Ctrl+left click on the work path layer created. Back to Layers tab, select the Holes layer and fill the selection with #000000.

Step 3b – Shattered Blocks:

Ctrl+left click on the Holes layer to load selection.

Select the Face layer and hit Ctrl+X to cut out the pixels. Then press Ctrl+V to paste and then name this new layer as Blocks.

Drag the blocks to the right with Move tool. Go to Edit > Free Transform to reduce the size slightly.

Step 3c – Shattered Blocks:

Duplicate the Blocks layer. Shift the lower Blocks layer 1 pixel to the left. Repeat this for 10 times and you will get some sort of extruding effect. Merge these 10 layers of duplicated Blocks and name this new merged layer as Sides. Right-click on the Sides layer and choose Blending Options. Activate Gradient Overlay and set Blend Mode to Normal, Opacity to 80%, Gradient from #000000 to #D58761 and Angle to 180. Leave the rest as default.

Step 3d – Shattered Blocks:

Activate Pattern Overlay and set Blend Mode to Multiply, Opacity to 100% Pattern to Metal Landscape. Leave the rest as default.

Right-click on Blocks layer and choose Blending Options. Activate Outer Glow and set Blend Mode to Color Dodge, Opacity to 75%, Color to #FFFFFF and Size to 10px. Leave the rest as default.

Step 3e – Shattered Blocks: Repeat Step 3a to 3d for 2-3 more times to form more blocks floating towards the right.

Step 4 – Adding Depth to Holes: Merge all the Holes layers. Right-click on the merged layer and choose Blending Options.

Activate Bevel and Emboss, set the Style to Inner Bevel, Depth to 72%, Size to 5px, Soften to 0px, Angle to 0, Altitude to 50, Highlight Mode to Screen, Highlight Color to #DCA57E, Highlight Opacity to 100%, Shadow Mode to Multiply, Shadow Color to #000000 and Shadow Opacity to 75%. Leave the rest of settings as default.

Step 5 – Adding Smoke:

Create a new layer below the Blocks and name it as Smoke. Set the foreground color to #FFFFFF. Load the Reborn brushes downloaded earlier and paint a few smoke of different sizes on this layer.

Right-click on the Smoke layer and choose Blending Options. Activate Outer Glow and set its Blend Mode to Linear Dodge (Add), Opacity to 75%, Color to #FFFFFF, Spread to 0px and Size to 5px. Leave the rest of settings as default.

Step 6 – Adding Dark Blocks:

Create a new layer and name it as Dark Blocks.

Using Pen tool, path out few more blocks along the face grid. Fill the shapes with #000000.

Set the Blend Mode of Dark Blocks layer to Soft Light.

Step 7 – Adding Light Blocks:

Create a new layer and name is as Light Blocks.

Similar to Step 6 but this time fill the shapes with #FFFFFF.

Set the Blend Mode of Light Blocks layer to Soft Light.

Step 8 – Adjusting Colors: Now we need to smooth the face a little. Select the Face layer and go to Filter > Blur > Surface Blur. Set the Radius to 5px and Threshold to 15 levels.

Create a new Levels Adjustment Layer and key in 10, 1.25, 244.

Create a new layer and using a large Soft Brush tool with color #000000 and opacity 40%, paint some dark areas on the right to fade the blocks slightly.

Optional:

I merely added a barcode on her right arm to complete the design.

This is another long tutorial and I hope you will like this effect.

Tutorial by http://10steps.sg/photoshop/create-a-face-shattering-effect/